Skip to main content Link Menu Expand (external link) Document Search Copy Copied
46F Docs

void seperateSpin(vector<double> velocities)

Spins all motors in the group at the specified velocities in pct.

If the number of velocities specified does not match the number of motors in the group, the function will print “MotorGroup::seperateSpin: Speeds vector size does not match motor size” to the terminal and exit.

The intended use of this function is to control omni-directional drive trains, but you could use it for something else.

Parameters

  • velocities - the velocities to spin the motors at in pct

Example 

vex::motor m1 = vex::motor(vex::PORT1);
vex::motor m2 = vex::motor(vex::PORT2);
vex::motor m3 = vex::motor(vex::PORT3);
vex::motor m4 = vex::motor(vex::PORT4);

MotorGroup mg = MotorGroup(m1, m2, m3, m4);

//... later in some function
mg.seperateSpin({50, 100, 75, 25});
//Spins m1 at 50% of its maximum velocity
//Spins m2 at 100% of its maximum velocity
//Spins m3 at 75% of its maximum velocity
//Spins m4 at 25% of its maximum velocity